This Design Idea shows how to use a 63¢ (Q=1) microprocessor reset voltage detector IC in a relay coil drive circuit to greatly reduce the coil’s hold-in current. When asked to estimate the coil ...

A transformer switching onto a line can sometimes cause a circuit breaker to trip or a fuse to blow. This phenomenon occurs even if the transformer presents no load, such as when the secondary is open ...

Relays and solenoids are available with many different voltage ratings. Most factory- and process-automation equipment operates from 24-V supplies. However, customers may have control signals for a ...

This chapter covers representative general-purpose relays used in the control circuits of most industrial, commercial, and consumer products. Relay names and terminology are in accordance with ...

Relays usually are driven using optocouplers, which offer isolation between analog and digital grounds to ensure that switching currents in the relay coils do not affect the noise margin of the ...

Acceptable ohm reading for a good current relay. One type of starting relay used on fractional-horsepower compressors is the current relay. This type of starting relay uses the initial high inrush ...

Relays and contactors use a variety of technologies to switch signals and power connections. Many devices called relays use similar techniques and topologies, but the terminology can be confusing.