Dec 31, 2012 · I want to know the relation between sampling frequency (Hz) and sampling rate (sample per second). For example, a 1 Hz sin wave sampled at 8000 samples per...

Oct 5, 2007 · sampling frequency What is the difference of Cutoff Frequency and Sampling Frequency when it comes to sensor Input?

Jun 15, 2011 · Modulating frequency is the carrier frequency. You shift the spectrum of the low pass signal to the required channel by multiplying it with the carrier frequency. are you talking about digital …

Dec 20, 2002 · sampling frequency In order to recover the original signal. You must get the maximum frequency of the original signal, and at least set the sampling frequency to 4 times. In your case: …

Nov 18, 2014 · The sampling rate is determined by the highest signal frequency you want to capture by the ADC. If you want the full 50kHz of the sensor response, then the Nyquist sampling criteria states …

Feb 27, 2012 · A Nyquist frequency of 1 kHz would refer to a stationary 1 kHz sine signal, thus no additional information is revealed when sampling it above 2 kHz, as rohitkhanna mentioned. Under …

Oct 24, 2010 · The max frequency as you stated earlier is one half the sampling frequency. If you can sample (update your DAC) at 1 us intervals then Nyquist says you can achieve a max frequency of …

Apr 22, 2014 · A bandpass signal has lower frequency 1002.5 khz and higher frequency 1046 khz. Determine the minimum sampling rate so as to have a minimum guard band of 4khz between two …

Jun 26, 2013 · Input sampling rate is a technical detail information, dedicated to readers with basic knowledge about oversampling ADCs. If you don't want to get bothered with it, there's also a clear …

Jan 18, 2016 · Use a different coherent sampling frequency for each input frequency that you want. You you can also use the calculator functions. If you are using IC6.1.6 and above then there is a built in …